Skip to content
Book a call
A glass watering can pours water into a shallow glass pot beside a tall glass plant, while a small seedling at the edge stays dry, on a black background.
← All Transmissions

Why aren't your new Meta ads getting spend?

Key takeaways

When new Meta ads aren't getting spend, first check whether they're delivering at all. An ad with no impressions has no metrics to judge, so start with its review status, the Delivery column, any Learning limited warning, your bid and budget settings and auction overlap. If the ad is active but gets little spend, Meta is favoring ads it predicts will do better, which is worth investigating before you call it a failure. Once it has delivered, I read hook rate, then the hold and drop-off chart, then CTR, then CPM. Hook rate is a soft diagnostic for ads that aren't working, never a reason to change a profitable ad, and a high CPM is a clue rather than proof.

First check whether the new ad delivered at all

When new Meta ads aren't getting spend, two different problems can sit behind the same complaint. Either the ad isn't delivering at all, or it's delivering a little while Meta keeps the budget on your older ads. One advertiser on r/FacebookAds described the second case: most of the budget kept going to existing ads, so they couldn't tell whether the new creatives were weak or just hadn't had a proper chance. The first is about eligibility and settings, and the second is about what Meta predicts each ad will do.

I separate the two before I look at a single creative metric. An ad with no impressions has no hook rate, no hold rate and no click-through rate, so there's nothing to judge it on yet. Even Meta's own relevance scores need volume: its page About Ad Relevance Diagnostics says they aren't available for ads with fewer than 500 impressions.

Meta ad delivery checks to run first

Start in the Delivery column of Ads Manager, at every level. Meta's page View campaign, ad set or ad delivery status in Meta Ads Manager notes that a campaign can look active while an ad set or ad below it is still in review.

  • If the ad says In review or Rejected, it hasn't cleared Meta's checks. Meta's page About Ads In Review says most ads are reviewed within 24 hours, though some take longer, and that edits to targeting, creative or optimization start a new review.
  • If it says Preparing, it has passed review and the system is still matching it to the right bid and audience. The status page says it enters learning or becomes active after its first impression.
  • If the ad set says Learning limited, it's unlikely to get about 50 optimization events in the week after its last significant edit. Meta's page About Learning Limited names a small audience, a low budget, a low bid or cost control, high auction overlap, a rare optimization event and too many ads running at once as causes. Our guide to how many ad concepts you can test shows how to plan fewer new ads at a steady pace.
  • If the settings are tight, they can hold delivery back. Meta's page Troubleshoot ad delivery: one of your ad sets isn't running points to restrictive schedules, bid caps or cost per result goals set too low, and an audience that's too narrow. Its general rule is a daily budget of at least ten times the average cost of the optimization event.
  • If the new ad shares an audience with an older winner, your own ads may be competing. When two of your ads enter the same auction, Meta's page Understand auction overlap says it picks the one with the highest total value and leaves the others out.

Why Meta spends on some ads and not others

If the ad is active and has some impressions but very little spend, Meta is choosing other ads over it.

Each time Meta can show an ad, it runs an auction. Its page About Ad Auctions says the winner is the ad with the highest total value, which combines the bid, the estimated action rate and ad quality. The estimated action rate is Meta's estimate of whether a person will engage with or convert from that ad.

Budgets follow the same logic. Meta's page About Advantage+ campaign budget says the campaign budget is distributed in real time to the ad sets with the best opportunities and may not be spent equally. Campaign budget is also one of the settings behind Advantage+ sales campaigns. Within an ad set, Meta's page Troubleshoot ad delivery: specific ads in your campaign aren't delivering enough says it's normal for some ads to get more impressions than others, because over time the system learns which ads perform best for you.

Meta has had time to learn about your older ads, and it knows very little about a new one. Adding that new ad to an ad set is also a significant edit, and Meta's page About the learning phase for ad sets in Meta Ads Manager says results during learning aren't necessarily a sign of future performance. Our learning phase entry explains which edits count. So low spend on a new ad is a prediction you can investigate, and it doesn't prove the ad failed.

Once the ad has delivered, read the creative in this order

When a new ad has enough impressions to read, I check four numbers in a fixed order. Each one is a ratio, so I check what it's divided by before I compare two ads.

  1. Hook rate comes first. It's 3-second video plays divided by impressions, as our hook rate entry explains, so it shows how many people who saw the ad stopped for three seconds. It's a soft diagnostic. I use it to find out why an ad isn't working, not to judge an ad that is. If an ad sits at a 15 or 20% hook rate and still brings in a profitable ROAS, there's no problem to fix. When an ad isn't working and its hook rate sits around 10 to 20%, I look at the hook first. Anything from 20 to 40% isn't a bad sign on its own, and at 40 to 50% the opening is doing its job, so I move on to the body.
  2. Hold rate and the drop-off chart come next. Hold rate is commonly calculated as ThruPlays divided by 3-second video plays, so it shows how many of the people who stopped kept watching. Meta's page About the Video Performance Card in Meta Ads Manager says the card charts the share of plays that reach each point in the first 60 seconds, which shows where people leave. If they drop off in the body, I might shorten it, or add context the viewer is missing.
  3. Click-through rate is third. Meta's page CTR (link click-through rate) defines it as link clicks divided by impressions. A low CTR on an ad that holds attention can mean the message or the offer isn't clear enough for people to act on. Clearer words often come from what customers already say, as our guide to turning customer reviews into a creative brief explains.
  4. CPM comes last. Meta's page CPM (Cost per 1,000 Impressions) defines it as the amount spent divided by impressions, multiplied by 1,000. A high CPM is a clue, but it doesn't prove that Meta can't find your audience.

The hook rate ranges are where I start looking in my own work, and they aren't benchmarks. None of them is a reason to change an ad that's profitable. Hook rate moves with the format, the placement, the audience and the offer, so compare ads of a similar length, shown to similar people, over the same dates.

CPM needs the most care. Prices come out of the auction, so other advertisers bidding for the same people push them up. Meta's page The cost of Instagram ads lists industry competition, the audience you target, ad relevance and timing among the factors, and says costs often spike around Black Friday, Cyber Monday and the holidays. In my experience placement changes CPM too, so compare the same placements over the same dates before you read anything into it.

Hook rate and hold rate only work for video. For a static ad, I go straight to CTR and what people do after the click. If the CTR is healthy but sales don't follow, the problem may sit after the click, and our guide to Facebook ads getting clicks but no sales covers those checks.

What each finding means and what to do next

What you find and what to do next
What you findWhat it can meanWhat to do next
The ad has shown In review for more than a dayMeta is still checking it against its Advertising StandardsWait, and avoid edits that start a new review
The ad is rejectedMeta found something that breaks its Advertising StandardsFix the issue, or request another review if you think it's a mistake
The ad set shows Learning limitedIt's unlikely to get about 50 optimization events in a weekCheck the audience, budget, bid controls and how many ads are running
The ad is active but has almost no impressions next to an older winnerMeta predicts more value from the older ad, or the two overlap in the same auctionsCheck for auction overlap before you judge the creative
The hook rate sits around 10 to 20% on an ad that isn't profitableThe opening may not be stopping enough peopleTest new hooks for the same body
The hook rate is 40 to 50%, but viewers leave in the bodyThe body loses people after a good openingShorten the body, or add the context viewers need
People watch, but the CTR is lowThe message or offer isn't clear enough to act onMake the offer and the next step plainer
The CPM is highCompetition, timing, placement or relevanceCompare the same placements and dates before you change the ad
The CTR is healthy, but sales are lowThe problem may sit after the clickCheck the website and tracking first

If a new ad looks fine on every check and still gets little spend, Meta's creative test is one way to give it room. Its page Set Up a Creative Test in Meta Ads Manager says the test provides delivery to new test ads inside an existing campaign, and it suggests using no more than 20% of the existing budget on them.

Where Fifth Dimension fits

With Meta Ads Management, we handle campaign setup, creative testing, tracking, optimization and reporting, and we check delivery before we judge the creative. When the creative is the problem, Creative Strategy covers the research, concepts, briefs and production of the next round.

I'm personally involved in every account, leading the day-to-day strategy and major parts of the execution, with no account manager in between. Our prices are on the services page, and you can book a call to go through the ads that aren't getting spend.

Putting it into practice

  • Check the Delivery column, review status and settings before you judge a new ad's creative.
  • Treat low spend on a new ad as Meta's prediction, then read hook rate, hold, CTR and CPM in that order.
  • Compare ads of a similar length and format over the same dates, because no single hook rate or CPM is right for every account.

Frequently asked questions

How long should I wait before deciding a new ad isn't getting spend?

Meta says most ads are reviewed within 24 hours, though some take longer, and its ad set troubleshooting page says you may need to wait up to 24 hours to see delivery. If an ad has been published for at least 48 hours and Meta's troubleshooting checks don't explain why it isn't delivering, Meta recommends deleting it and creating it again. If it is delivering, wait until it has enough impressions for its hook rate and hold rate to mean something.

Is it normal for one ad to get most of the budget?

Yes. Meta says it's normal for some ads to get more impressions than others. With Advantage+ campaign budget, Meta also says it may spend most of the budget on one ad set, so it recommends reading results at the campaign level.

What is a good hook rate for Meta ads?

There's no single number, because hook rate moves with the format, placement, audience and offer. It's a soft diagnostic, and a low hook rate isn't a problem on an ad that's profitable. In my own work, when an ad isn't working, a hook rate around 10 to 20% sends me to the hook, 20 to 40% isn't a bad sign on its own, and 40 to 50% sends me to the body. Compare your own ads over the same dates, and see our hook rate entry for how it's calculated.

Do hook rate and hold rate work for static ads?

No. Both need video plays. For a static ad, judge the opening by what people do next, such as clicking through or buying.

Can Fifth Dimension check why our new ads aren't spending?

Yes. With Meta Ads Management, we run your campaigns, creative testing and tracking, and we check delivery before we judge the creative. If the creative needs work, Creative Strategy plans and produces the next round. Our prices are on the services page, and you can book a call to go through your account.